Car Wash Detergents
| Print |

ALBERTA FOAM STICK™

ALBERTA FOAM STICKS™ are Special foam sticks that contain HIGHLY active surfactants, friction reducer and foam stabilizer in water-soluble tubes. When this foamer is released it acts very quickly to lift water from the well.

PART NO.

AC-3450 - 1 1/4 X 15

 


MSDS DOWNLOAD
(Requires Login)

BIG DIPPER SOAP™ STICK

BIG DIPPER SOAP STICKS™ are a water-soluble sticks containing a high foaming surfactant formulated to dissolve quickly with little or no agitation. Excellent results in bring a well up to production levels quickly. Works well in wells that the operator has to blow down

PART NO.

AC-4350 - 1 1/4 X 15

 

 


MSDS DOWNLOAD
(Requires Login)

CANADIAN BLOWOUT STICK

CANADIAN BLOWOUT STICKS are excellent sticks for wells with low bottom hole pressures. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.This stick works well wit well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS.

PART NO.

AC-4120 -- 5/8 X 15

AC-4150 -- 1 1/4 X 15

AC-4190 -- 1.8 X 18

AC-4195 -- 2.1 X 18

 

 


(Requires Login)

COR-FOAM STICK

COR-FOAM (FOAMER/CORROSION} STICKS are a unique chemical stick that contains 100% active ingredients that protect wells from corrosion and produce high amounts of foam. This product is contained in a water soluble tube with soluble caps.

PART NO.

AC-5540 -- 1 1/4 X 9

 


(Requires Login)

FISHER KING SC-21 STICK

FISHER KING (SC-21) STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick also works well in wells with high brine or condensate levels to 65%.This stick works well with well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS

PART NO.

AC-4010 -- 5/8 X 15

AC-4010 -- 3/4 X 15

AC-4035 -- 1 X 15

AC-4050 -- 1 1/4 X 15

AC-4075 -- 1 3/8 X 16

AC-4080 -- 1 5/8 X 18


(Requires Login)

KWIK-N-DRY STICK


KWIK-N-DRY SOAP STICKS are water-soluble sticks containing a high foaming surfactant formulated to dissolve quickly with little or no agitation. Excellent results in bring a well up to production levels quickly. Works well in wells that the operator has to blow down.

PART NO.

AC-3030 -- 1 X 10 1/2

AC-3035 -- 1 X 15

AC-3050 -- 1 1/4 X 15

AC-3070 -- 1 3/8 X 5 1/2


MSDS DOWNLOAD
(Requires Login)

LAREDO FOAM STICK

LAREDO FOAM STICKS™ are Special foam sticks that contain 100% active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Works excellently in wells that contain condensate up to 65%.This stick works well wit well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS

PART NO.

AC-0550- -- 1 1/4 X 15

 

 


MSDS DOWNLOAD
(Requires Login)

LIQUID FOAM STICK

LIQUID FOAM STICKS are a highly active, very concentrated liquid foaming agent, contained in a water soluble tube. Used as an aid for unloading produced water in gas wells contaminated with brine, hydrocarbons and/or dissolved solids.

PART NO.

AC-2545 -- 1 1/4 X 12

AC-2550 -- 1 1/4 X 15

AC-2560 -- 1 1/4 X 18


MSDS DOWNLOAD
(Requires Login)

MAX FOAM STICK

MAX FOAM STICKS™ are Special foam sticks that contain one of the highly active surfactants that can be put in stick form ,active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Works excellently in wells that contain condensate up to 65%.This stick works well wit well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS

PART NO.

AC-5250 -- 1 1/4 X 15

 

 

 


MSDS DOWNLOAD
(Requires Login)

NORTHERN STAR STICK

NORTHERN STAR STICKS are especially effective in wells which contain both water and condensate up to 65%. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.This stick works well wit well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS

PART NO.

AC-1510 -- 5/8 X 15

AC-1520 -- 3/4 X 15

AC-1535 -- 1 X 15

AC-1550 -- 1 1/4 X 15

AC-1575 -- 1 3/8 X 16

AC-1580 -- 1 5/8 X 18


MSDS DOWNLOAD
(Requires Login)

OIL (CONDENSATE) FOAM STICK™

(CONDENSATE) OIL FOAM STICKS are primarily used to increase production by removing condensate and water from gas-condensate wells. The foaming action decreases the hydrostatic back-pressure which increases gas production which further enhances the foaming action until the well unloads. Water must be present to enhance the foaming action in wells with BHT less than 130 degrees Fahrenheit. Designed for wells where the colum has over 65% condensate.


PART NO.

AC-8010 -- 5/8 X 15

AC-8035 -- 1 X 15

AC-8050 -- 1 1/4 X 15

AC-8075 -- 1 3/8 X 16

AC-8080 -- 1 5/8 X 18

AC-8090 -- 1.8 X 18

AC-8095 -- 2.1 X 18


MSDS DOWNLOAD
(Requires Login)

SAND FOAM STICK

SAND FOAM STICKS ( “SAND, SLUDGE & SILT” dispersant c/w foamer) are designed to convert dense sludge and silt deposits into light non adherent agglomerates that permit easy dispersion. Foaming agents aid in the unloading of natural gas wells where water buildup reduces production.

PART NO.

AC-3520 -- 3/4 X 15

AC-3550 -- 1 1/4 X 15

 


MSDS DOWNLOAD
(Requires Login)

SLICK STICK

SLICK STICKS are water-soluble sticks containing a combination of surfactants and friction reducer. This stick can be used in wells which contain levels of condensate to 65%; Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS.

 

PART NO.

AC-7510 -- 5/8 X 15

AC-7535 -- 1 X 15

AC-7550 -- 1 1/4 X 15

AC-7575 -- 1 3/8 X 16

AC-7580 -- 1 5/8 X 18


MSDS DOWNLOAD
(Requires Login)

SLICK WILLIE OIL FOAM STICKS

SLICK WILLIE OIL FOAM STICKS are especially effective in a water, condensate and hydrocarbon environment. Special sticks that contain 100% active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Natural gas bubbling through the water column and 100% active ingredients produces foam which can help remove water from watered-up gas wells.

PART NO.

AC-8120 -- 3/4 x 15

AC-8140 -- 1 1/4 x 9

AC-8150 -- 1 1/4 x 18


MSDS DOWNLOAD
(Requires Login)

SUPER FOAM STICK

SUPER FOAM STICKS are a stick that contains 100% active foamer in a water soluble tube that can produce up to four (4) times more foam than some other sticks on the market. This stick can develop stable foam in high temperature deep gas wells. This stick works well wit well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS


PART NO.

AC-5020 -- 3/4 X 15

AC-5040 -- 1 1/4 X 9

AC-5050 -- 1 1/4 X 15

AC-5065 -- 1 1/4 X 18

AC-5070 -- 1 3/8 X 5


MSDS DOWNLOAD
(Requires Login)

WESTERN STAR STICK

WESTERN STAR SOAP STICKS are especially effective in wells which contain both water and condensate up to 65%. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.This stick works well wit well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS

PART NO.

AC-4210 -- 5/8 X 15

AC-4210 -- 3/4 X 15

AC-4235 -- 1 X 15

AC-4250 -- 1 1/4 X 15

AC-4275 -- 1 3/8 X 16

AC-4280 -- 1 5/8 X 18


MSDS DOWNLOAD
(Requires Login)

ULTRA FOAM STICK

ULTRA FOAM SELF AGITATING STICKS are sticks that requires no agitation as it has a self agitating agent built in. This stick is also very effective in high brine environments. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.

PART NO.

AC-3110 -- 3/4 X 15

AC-3150 -- 1 1/4 X 15

 

 


MSDS DOWNLOAD
(Requires Login)