TOLL FREE: 1-866-414-1445
Stick Name & DescriptionMany Other Sizes Based on Length & Diameter Are Available
|
Stock Part No. & SizesStock Edmonton |
Manuf. Sizes & Part No.'s2-3 weeks Delivery
|
|
COR-FOAM STICK (Cor-Foam) |
||
|
In A Water Soluble Tube COR-FOAM (FOAMER/CORROSION} STICKS are a unique chemical stick that contains 100% active ingredients that protect wells from corrosion and produce high amounts of foam. This product is contained in a water soluble tube with soluble caps. |
ACL-5540 1 1/4 X 9 |
|
|
CORROSION INHIBITOR STICK “ A “ (Corrosion Inhibition Type A (Oil)) |
||
|
CORROSION INH. STICKS TYPE A are water dispersable and oil soluble sticks that contain a blend of Imidazolines which have excellent filming characteristics and low emulsion tendencies. This unique blend gives effective corrosion control for most oilfield corrosion problems. |
ACL-6050 1 1/4 X 15 |
ACL-6020 3/4 X 15 ACL-6035 1 X 15 ACL-6075 1 3/8 X 16 |
|
CORROSION INHIBITOR STICK "RB" (Corrosion Inhibition Type RB (Water & SRB's)) |
||
In A Water Soluble Tube Corrosion Inhibitor Sticks Type RB are water-soluble sticks designed to release corrosion inhibitor and control corrosion from various sources. Corrosion Inhibitor Sticks Type C and RB are especially effective in preventing Hydrogen Sulfide corrosion caused by sulfide reducing bacteria. The result of effective treatment will be reduced corrosion rates, a reduction in iron counts and iron sulfide deposits. This stick in B form has been adjusted to a higher level of Inhibitor because of itd size. |
||
|
CORROSION INHIBITOR STICK “ B “ (Corrosion Inhibition Type B (Water)) |
||
|
CORROSION INH. STICKS TYPE B are water soluble sticks designed to release corrosion inhibitor and control corrosion from various sources. Type B Corrosion Inh. Sticks contain Amine Salt in stick form.Corrosion Inhibitor Sticks Type B are effective in preventing Hydrogen Sulfide corrosion caused by sulfide reducing bacteria. The result of effective treatment will be reduced corrosion rates, a reduction in iron counts and iron sulfide deposits |
ACL-6150 1 1/4 X 15 |
ACL-6135 1 X 15 ACL-6175 1 3/8 X 16 |
|
CORROSION INHIBITOR STICK “ C “(Corrosion Inhibition Type C (Water & SRB's)) |
||
|
In A Water Soluble Tube Corrosion Inhibitor Sticks Type C and RB are water-soluble sticks designed to release corrosion inhibitor and control corrosion from various sources. Corrosion Inhibitor Sticks Type C and RB are especially effective in preventing Hydrogen Sulfide corrosion caused by sulfide reducing bacteria. The result of effective treatment will be reduced corrosion rates, a reduction in iron counts and iron sulfide deposits |
ACL-6250 1 1/4 X 15 |
ACL-6220 3/4 X 15 ACL-6275 1 3/8 X 16 |
|
CORROSION INHIBITOR PELLETS Corrosion Inhibition (Water)) |
||
|
Corrosion Inhibitor Pellets are water soluble pellets designed to release corrosion inhibitor. Surface active which aids in solids removal & control, while helping to eliminate the breeding grounds for micro organisms. Contains Ammonium Quaternary Salt in pellet form. Used in water injection systems, gas wells, cooling towers etc. Specific gravity of 1.15 to 1.25. Pellets will fall readily in brine solutions. Typical treatment of 30 PPM of 4200 U.S. gal. of water would require 1.05 lbs of CIP-25 pellets. |
ACL-CIP 40Lb Pail |
| < Prev | Next > |
|---|