Concrete Cleaner - Swimming Pool - Masonary
| Print |

MURIATIC ACID

Descaler-Acidizer

This 34% hydrochloric acid solution can be used to adjust the pH in swimming pools; etch or clean concrete, stone, and masonry; or remove rust from steel and wall tile.(613)

MURATIC ACID

Directions For Use

Always wear rubber gloves and safety goggles when handling this product. To adjust acidity in pools, use 200 mL of product per 10 000 L of water. Use a test kit to ensure that the pH is above 8.0. To etch or clean concrete, stone, or masonry, use 1 part product to 3 parts water. Scrub with a deck brush and rinse thoroughly with water. For rust removal, use 1 part product to 4 parts water. Use in well ventilated areas.

PART NO.

AC-PK300I-1 -- 12 X 1L CASE

AC-PK300I-4 -- 4 X 4L CASE

AC-PK300I-20 -- 20 LITRE PAIL

AC-PK300I-205 -- 205 LITRE DRUMS

 

BIOSOL Na8

Cement Cleaner

From landscaping to building construction, roadways to oil patch, the use of cement is extensive and the challenges of removing it safely are just as varied as its many purposes. Now, with minimal effort and time, remove old or excess cement with BioSol NA8 Cement Remover. Environmentally Friendly and easy to use, BioSol NA8 Cement Remover achieves optimal results without the use of harmful contaminates. Weather it is aluminum, steel, plastic or painted surfaces, BioSol NA8 Cement Remover dissolves cement without harming the original surface. BioSol NA8 Cement Remover presents no risk to the user and has easy equipment cleanup.

BIOSOL Na8

Directions For Use

Directions for use:1.Wash affected area with a pressure washer, then spray or foam BioSol NA8 Cement Remover and let stand for 20 minutes to allow product to penetrate and dissolve cement. 2.Allow product to soak onto affected areas until deposits have been removed or dissolved. 3.Rinse thoroughly with water

PART NO.

AC-PK300I-1 -- 12 X 1L CASE

AC-PK300I-4 -- 4 X 4L CASE

AC-PK300I-20 -- 20 LITRE PAIL

AC-PK300I-205 -- 205 LITRE DRUMS