Carpet Spot Remover & Deodorizer
| Print |

PROXI 3

Cleaner Sanitizer

CFIA approved. This hydrogen peroxide cleaner/sanitizer can used to clean non-porous, hard surfaces such as glass, stainless steel, bathroom surfaces, tile, grout and floors. It can also be used as a carpet extraction pre-spray and spot remover. For use in food plants, see directions.(637)

PROXI 3

Directions For Use

For light cleaning, use a solution of 1 part product to 100 parts water. For medium cleaning, use a solution of 1 part product to 50 parts water. For heavy cleaning, use a solution 1 part product to 10 parts water. For cleaning carpets and light spot care, use a solution of 1 part product to 50 parts water. Soak spot, let sit for 10 minutes, and then blot excess. For heavy spot care, use a solution of 1 part product to 10 parts water. Soak spot, let sit 5 - 10 minutes, and then blot with a clean absorbent cloth or extract. For use as a carpet extraction pre-spray or for heavy cleaning, spray (600 ft2 per L) on carpet, let sit for 10 minutes, then extract with clean water. To sanitize, dilute 1 part product to 35 parts water (30 mL per 1 L water) to create a 1100 ppm solution of hydrogen peroxide. Spray or wipe on to surface and let sit for 3 minutes. Food contact surfaces must be rinsed with potable water before reuse.

PART NO.

AC-PK300I-1 -- 12 X 1L CASE

AC-PK300I-4 -- 4 X 4L CASE

AC-PK300I-20 -- 20 LITRE PAIL

AC-PK300I-205 -- 205 LITRE DRUMS

 


 

DIGEST

Odour & Stain Degrader

This product is a liquid, cherry scented concentrate of specially selected bacterial strains combined with free enzymes. These enzyme catalysts work synergistically for the fastest action available in a liquid digester. This product digests and removes stains caused by oil, grease, starch, and urine. It offers instant masking of odours while the bio-enzymatic formulation permanently eliminates the source of the odours.(814)

DIGEST

Directions For Use

This product is ready to use or can be diluted with up to 5 parts water. Preclean to remove surface soil. To remove odour, pour product directly on spot, wet thoroughly, let stand for 5 minutes, and then blot with a towel. For thorough cleaning use 225 - 450 ml per 4.5 L of water in bonnet or extraction machine after the fabric has been cleaned using a carpet detergent. Shake well before use.

PART NO.

AC-PK300I-1 -- 12 X 1L CASE

AC-PK300I-4 -- 4 X 4L CASE

AC-PK300I-20 -- 20 LITRE PAIL

AC-PK300I-205 -- 205 LITRE DRUMS